Enum GeometryNode

#[non_exhaustive]pub enum GeometryNode {
Show 27 variants
    Point2(DVec2),
    Point3(DVec3),
    Vector2(DVec2),
    Vector3(DVec3),
    Frame2(Frame2),
    Frame3(Frame3),
    Transform(DAffine3),
    PointList2(Vec<DVec2>),
    PointList3(Vec<DVec3>),
    Curve2(Curve2),
    Curve3(Curve3),
    CurveRelation(CurveRelation),
    PointOnCurve(PointOnCurve),
    Surface(Surface),
    SurfaceRelation(SurfaceRelation),
    PointOnSurface(PointOnSurface),
    Profile(Profile),
    OpenProfile(OpenProfile),
    Primitive(Primitive),
    HalfSpace(HalfSpace),
    SolidOperation(SolidOperation),
    BRep(BRep<NodeId>),
    PolygonMesh(PolygonMesh),
    TriMesh(TriMesh),
    BoundingBox(Aabb),
    Instance(Instance),
    Collection(Vec<NodeId>),
}

Expand description

One node in an immutable geometry DAG.

The enum is non-exhaustive so representation growth is semver-compatible. Compilers must turn unknown/unsupported families into a structured Unsupported result rather than a wildcard no-op.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive

Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.

Point2(DVec2)

Two-dimensional position.

Point3(DVec3)

Three-dimensional position.

Vector2(DVec2)

Two-dimensional direction/vector.

Vector3(DVec3)

Three-dimensional direction/vector.

Frame2(Frame2)

Two-dimensional axis placement.

Frame3(Frame3)

Three-dimensional axis placement.

Transform(DAffine3)

Composed affine transform.

PointList2(Vec<DVec2>)

Dense two-dimensional point list.

PointList3(Vec<DVec3>)

Dense three-dimensional point list.

Curve2(Curve2)

Atomic two-dimensional curve.

Curve3(Curve3)

Atomic three-dimensional curve.

CurveRelation(CurveRelation)

Curve composition/constraint.

PointOnCurve(PointOnCurve)

Point on a curve.

Surface(Surface)

Atomic surface.

SurfaceRelation(SurfaceRelation)

Surface composition/constraint.

PointOnSurface(PointOnSurface)

Point on a surface.

Profile(Profile)

Exact section profile with area semantics.

OpenProfile(OpenProfile)

Authored exact open profile path without area or width semantics.

Primitive(Primitive)

Exact primitive solid.

HalfSpace(HalfSpace)

Unbounded half-space.

SolidOperation(SolidOperation)

Solid construction instruction.

BRep(BRep<NodeId>)

Exact topological representation linked to graph curve/surface nodes.

PolygonMesh(PolygonMesh)

Polygonal n-gon mesh before triangulation.

TriMesh(TriMesh)

Triangle mesh.

BoundingBox(Aabb)

Axis-aligned bounds.

Instance(Instance)

Instanced/mapped geometry.

Collection(Vec<NodeId>)

Ordered geometric set or representation.

Implementations§

impl GeometryNode

pub fn references(&self) -> Vec<NodeId>

Direct graph dependencies in deterministic order.

Trait Implementations§

impl Clone for GeometryNode

fn clone(&self) -> GeometryNode

Returns a copy of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for GeometryNode

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl From<Aabb> for GeometryNode

fn from(value: Aabb) -> GeometryNode

Converts to this type from the input type.

impl From<BRep<NodeId>> for GeometryNode

fn from(value: BRep<NodeId>) -> GeometryNode

Converts to this type from the input type.

impl From<Curve2> for GeometryNode

fn from(value: Curve2) -> GeometryNode

Converts to this type from the input type.

impl From<Curve3> for GeometryNode

fn from(value: Curve3) -> GeometryNode

Converts to this type from the input type.

impl From<CurveRelation> for GeometryNode

fn from(value: CurveRelation) -> GeometryNode

Converts to this type from the input type.

impl From<DAffine3> for GeometryNode

fn from(value: DAffine3) -> GeometryNode

Converts to this type from the input type.

impl From<Frame2> for GeometryNode

fn from(value: Frame2) -> GeometryNode

Converts to this type from the input type.

impl From<Frame3> for GeometryNode

fn from(value: Frame3) -> GeometryNode

Converts to this type from the input type.

impl From<HalfSpace> for GeometryNode

fn from(value: HalfSpace) -> GeometryNode

Converts to this type from the input type.

impl From<Instance> for GeometryNode

fn from(value: Instance) -> GeometryNode

Converts to this type from the input type.

impl From<OpenProfile> for GeometryNode

fn from(value: OpenProfile) -> GeometryNode

Converts to this type from the input type.

impl From<PointOnCurve> for GeometryNode

fn from(value: PointOnCurve) -> GeometryNode

Converts to this type from the input type.

impl From<PointOnSurface> for GeometryNode

fn from(value: PointOnSurface) -> GeometryNode

Converts to this type from the input type.

impl From<PolygonMesh> for GeometryNode

fn from(value: PolygonMesh) -> GeometryNode

Converts to this type from the input type.

impl From<Primitive> for GeometryNode

fn from(value: Primitive) -> GeometryNode

Converts to this type from the input type.

impl From<Profile> for GeometryNode

fn from(value: Profile) -> GeometryNode

Converts to this type from the input type.

impl From<SolidOperation> for GeometryNode

fn from(value: SolidOperation) -> GeometryNode

Converts to this type from the input type.

impl From<Surface> for GeometryNode

fn from(value: Surface) -> GeometryNode

Converts to this type from the input type.

impl From<SurfaceRelation> for GeometryNode

fn from(value: SurfaceRelation) -> GeometryNode

Converts to this type from the input type.

impl From<TriMesh> for GeometryNode

fn from(value: TriMesh) -> GeometryNode

Converts to this type from the input type.

impl PartialEq for GeometryNode

fn eq(&self, other: &GeometryNode) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for GeometryNode

Auto Trait Implementations§

impl Freeze for GeometryNode

impl RefUnwindSafe for GeometryNode

impl Send for GeometryNode

impl Sync for GeometryNode

impl Unpin for GeometryNode

impl UnwindSafe for GeometryNode

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<T> Pointable for T

const ALIGN: usize

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,